I have 12 x 2tb drives.
How should I do this? Should I use 5gb for the OS and the rest for storage? Throw your suggestions on what you think would be the best setup for me.
XFileSharing Pro - How Should I partition my drives?
I will ask before some information,
What is your Server Spec?
What is your Server cost with BW?
What is your Raid Setup? (0/1/10/5/50/60/100? Strip Size?)
What is your Hardware Raid Card?
5GB is not enough for OS
I suggest 50GB for OS, other part can store files
I have some servers with 12x2 TB Disk.
Main server hardware and Hardware Raid card type/model is very important on your Disk IO performance.
What is your Server Spec?
What is your Server cost with BW?
What is your Raid Setup? (0/1/10/5/50/60/100? Strip Size?)
What is your Hardware Raid Card?
5GB is not enough for OS
I suggest 50GB for OS, other part can store files
I have some servers with 12x2 TB Disk.
Main server hardware and Hardware Raid card type/model is very important on your Disk IO performance.
If you can split your OS driver and StorageDriver for more performance.mubin wrote:Processor(s) Intel 4-core 2.13 GHz (E5606)
Memory 16 GB
RAID controller HP P410/512MB BBWC
Harddisk(s) 12x 2 TB SATA
Uplink port 1 GBIT
Raid 5
Your Main CPU and Controller is good. For my exprince HP P4XX > Dell H7XX
Looks your server from Leaseweb/reseller.
Can you tell me cost of this server?
I have before smillar server with a bit more hardware (2x CPU, 32GB Ram) + unmetered dedicated, 1Gbit guarantiy speed 1100€
Depends on what you want to privilege: performance or space ?mubin wrote:How should I split the OS driver and Storage Driver? How much each space?
For max performance: Raid 10
For space (and even performance) : Raid 5/6
With this very advanced hardware raid controller you can have two disks with Raid 1 for Os (but is a waste of space), the other remaining ten drives with the raid level you want.
And yes, this seems a Leaseweb server config.
Bye